SÖLL MULTIRAIL HORIZONTAL GUIDED RAIL
The Söll MultiRail horizontal guided rail provides workers with a flexible fall arrest system
Compared to anchorage points (which only offer the user a limited freedom of activity depending on the length of the lanyard) the MultiRail system can be installed along the entire unprotected work area, offering greater safety.
Söll MultiRail offers the advantage of greater fixing distances (up to 6m) and can be used by more people at the same time (up to 6).
The system allows installation at foot level, wall or overhead, and is available with 3 different types of gliders to suit any application.
It is easy to install with minimal components. A floating rail design allows for thermal expansion, and minimum impact transmission to the structure in the event of a fall. Pre-constructed corner sections allow the system to be easily customised to a structure. Made from stainless steel the ultra robust Söll MultiRail is suited to the toughest environmental conditions.
GLIDERS
The gliders provide 3 options including closed, openable and wheeled runner for overhead applications.- Closed glider can be removed at any rail end exit point.
- Polyamide inlays allow it to move smoothly along the rail.
- Openable glider is easily removed from or attached to the rail at any point, offering more flexibility to the user.
- The wheeled runner features 4 load-bearing wheels, and a swivelling stainless steel eye for straight runs, and around horizontal curves.
17407 CLOSED GLIDER
17792 OPENABLE GLIDER
24168 WHEELED RUNNER
RAIL SUPPORTS
The rail supports offer users a choice of bracket for their mounting application.- Made from pickled stainless steel.
- Internal Teflon® ribbons assist the safety rail to glide smoothly in the brackets and allows for thermal expansion.
17489 BRACKET FIXES SURFACES PARALLEL TO RAIL
17112 BRACKET FIXES SURFACES AT 90° TO RAIL
HORIZONTAL RAIL
Made of stainless steel, the horizontal rail is available in fixed lengths of 6m.- Pre-drilled for easy insertion of end stops or connectors for additional lengths.
- The rail end stop with exit allows system exit at both ends.
- The rail end stop without exit serves as an end anchorage.
19146 HORIZONTAL SAFETY RAIL 6m LENGTHS
17861 RAIL END STOP WITH EXIT
17404 RAIL END STOP WITHOUT EXIT
CONNECTORS AND BENDS
Provides workers with the flexibility to exit rail sections, connect rail sections together or move around corners.- The anodised aluminium connector is used to connect individual rail sections together for a longer system.
- Corner units are available for vertical or horizontal bends.